Pipe Stand Safety Information & Capacity V Head and roller head maximum load rating will affect total pipe stand load capacity
Heavy Duy Folding Pipe Stand
HCPS-36	HCPS-30	HCPS-22	HSPS-15
				RH-36 on two folding heavy duty stands
All heavy duty HCPS pipe stands with 1" threaded jack rod, 1" pipe inner sleeve and positive lock pin are suggested for pipe up to 28" diameter with the appropriate V head or rollerhead.
The standard HCPS-15 pipe stand is the 15" tall pipe stand that is an exception-having a maximum suggestion of 16" pipe diameter.
Sizes and capacities for pipe stands are also listed in catalogue.
Pipe stand load should not exceed 40% of load failure test.
IMPORTANT NOTE
All pipe must be supported with center of gravity directly above center of pipestand for given ratings of stand to apply. For the load rating to apply, the locking safety pin must be properly inserted in the pipestand.

Maximum suggested pipe diameter is 48" when using double threaded roller head (RH-48) on two ABA Super Stands.
Maximum suggested pipe diameter is 36" for single ABA Super Stand with appropriate V head. Maximum pipe size for Superstand Rollerhead is 28".
		RH-48 roller head on superstands
IMPORTANT NOTE All pipes must be supported with center of gravity directly above center of pipe for given ratings of stand to apply.
	Positive lock pin pipe stand is safest stand for heavy pipe: 1. Absolutely no slippage for inner sleeve 2. A visual check will verify pipestand is safe to use